Audi Urq/B2 Firewall Brace
The master cylinder on B2 chassis Audis mounts directly to the firewall and is not reinforced from the factory. This often causes excessive movement and cracking of the firewall over time from using the clutch pedal. This brace bolts inside the engine bay and braces the master cylinder to the steering rack mounting points with a simple bolt-on installation.
Installation Note: In most cases this installs directly using the existing hardware in the vehicle, however we have seen some some cases where the master cylinder studs are not quite long enough. In such a case simply unscrew the studs from the master cylinder and use slightly longer bolts to re-install.
Material: Steel
Finish: Black Powder Coat
The master cylinder on B2 chassis Audis mounts directly to the firewall and is not reinforced from the factory. This often causes excessive movement and cracking of the firewall over time from using the clutch pedal. This brace bolts inside the engine bay and braces the master cylinder to the steering rack mounting points with a simple bolt-on installation.
Installation Note: In most cases this installs directly using the existing hardware in the vehicle, however we have seen some some cases where the master cylinder studs are not quite long enough. In such a case simply unscrew the studs from the master cylinder and use slightly longer bolts to re-install.
Material: Steel
Finish: Black Powder Coat
The master cylinder on B2 chassis Audis mounts directly to the firewall and is not reinforced from the factory. This often causes excessive movement and cracking of the firewall over time from using the clutch pedal. This brace bolts inside the engine bay and braces the master cylinder to the steering rack mounting points with a simple bolt-on installation.
Installation Note: In most cases this installs directly using the existing hardware in the vehicle, however we have seen some some cases where the master cylinder studs are not quite long enough. In such a case simply unscrew the studs from the master cylinder and use slightly longer bolts to re-install.
Material: Steel
Finish: Black Powder Coat